Jensen VM9725BT Operating Instructions Manual page 46

VM9725BT
Controlling Playback
Inserting a Disc
Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a
disc in the unit or if the power is off.
Ejecting a Disc
Press the EJECT ( ) button on the front of the unit to eject the disc. The unit
automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the
disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the EJECT ( ) button to reset the loading mechanism. Normal
operation resumes.
Pausing/Resuming Playback
Touch the icon to pause playback. Touch the icon to resume playback.
Moving Through Tracks
Touch the icon to advance to the next track on the disc.
Touch the icon to move to the previous track.
Repeat Playback
Touch the icon to alter repeat mode according to the following:
• DVD: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-DA: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• DVD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
•
Random Play Select
Touch the icon to play the tracks on the disc in a random, shuffled order. Touch
the icon again to cancel Random Play mode.
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
46