Jensen VM9725BT Operating Instructions Manual page 25

VM9725BT
Beep
Background Animation
Star
Starry Sky
Black
Animation
Fireworks
Animation
Wave
User
Defined
Calibration Start
Demo On
Off
Touch Screen Calibration
To access the "Touch Screen Calibration" function from the General sub-menu:
1. Select the "Calibration" Start option. A calibration test pattern appears on the
screen.
2. To begin calibration, touch and hold the crosshair ( + ) that appears in the "1"
icon in the center of the screen. After about one second, the crosshair moves
to the "2" icon in the quadrant.
3. Continue for each quadrant until the calibration is completed.
Demo Mode Features
The Demo mode is to On (Auto run) by default. The Demo mode will display
various user interface TFT display pages such as the Radio, Disc, Aux In, and
Camera sources. The Demo mode will also display the Equalizer and Settings
menu pages. Touching any portion of the touch screen will pause the Demo mode
temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo
mode will resume.
To turn the Demo mode off, access the General Sub-menu Settings and turn Demo
to Off.
No beep sounds.
When turned on, an audible beep tone confirms
each function selection.
Allows the user to select a screen background.
The Wallpaper will not appear on the Main
Source Menu, Camera source or EQ settings
page.
Press to access the touch screen calibration
function.
Display various user interface TFT display pages.
Displays the Equalizer and Settings menu pages.
25