Jensen VM9725BT Operating Instructions Manual page 48

Mobile multimedia receiver
Hide thumbs Also See for VM9725BT:
Table of Contents

Advertisement

For example, a medium with the following folder/file hierarchy is subject to Folder
Search, File Search or Folder Select, as shown below.
The VM9725BT player will only recognize three folder levels and does not display
folders containing only other folders. In the example above, the unit will display
folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly.
Folder 5 is not recognized at all since it is at the fourth level.
Inserting a USB/SD Card Device
NOTE: Front and rear USB ports are for either Apple iPod® / iPhone® devices, USB
memory sticks or portable HDD. The rear 3.5mm connector (bundled with the USB
port) is for iPod® / iPhone® video only. The USB/SD ports will recognize most USB/
SD flash memory devices and portable hard drives. The unit supports 8GB SD cards
however SD cards larger than 8GB may not be recognized. Portable hard drives
(hard drives must be formatted to FAT32 and NTFS is not supported).
1.
Locate the USB/SD connector on the front of the radio.
USB
Port
SD
Open
Card
Slot
2. Lift the protective cover to reveal the USB/SD slots.
3. Insert the USB/SD device into the USB/SD connectors. The unit will read the
audio/video files on the USB/SD device automatically.
To remove the USB/SD device, press the SRC button or use the SOURCE MENU to
switch to another mode, and then remove the USB/SD device from the connector.
48
Protective
Cover
VM9725BT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm9726bt

Table of Contents