Jensen VM9725BT Operating Instructions Manual page 24

NOTE: If the rear-view video camera is connected and the unit is on, Camera mode
is selected upon shifting into REVERSE gear. If the monitor is in display mode, the
monitor automatically switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor returns to its original input mode.
General Sub-menu Settings
Setting Options
User Interface Aqua
Color
Red
Blue
Amber
Green
Europe
Off
10s
20s
Auto
Night
Dark
Normal
Bright
RGB Light Adjust
24
Function
This setting allows the user to select five
pre-defined LED colors for the front panel
illumination.
• AM Frequency Spacing - 10 kHz
• AM Frequency Band - 530 kHz ~ 1720 kHz
• FM Frequency Spacing - 200 kHz
• FM Frequency Band - 87.5 MHz ~ 107.9 MHz
• AM Frequency Spacing - 9 kHz
• AM Frequency Band - 522 kHz ~ 1620 kHz
• FM Frequency Spacing - 50 kHz
• FM Frequency Band - 87.5 MHz ~ 108.0 MHz
Screen remains on continuously.
Screen goes blank (standby mode) after 10
seconds of inactivity. Touch the screen to exit
standby and view the display.
Screen goes blank (standby mode) after 20
seconds of inactivity. Touch the screen to exit
standby and view the display.
This setting dims the LCD screen when the
vehicle's headlights are turned on. FIve settings
are pre-defined.
This setting allows the user to tune the RGB
colors of the LEDs to obtain an exact match for
their vehicle.
VM9725BT