Sound And Warnings - Jensen VM9725BT Operating Instructions Manual

Sound and Warnings

Adjust the sound volume, mute your device or change the voice guidance
language. In addition, you can enable and set up different warnings and alerts.
Button
120
Description
Tap this button to adjust the volume of the different
sounds in the application. A new screen shows the
different sound types and their controls. See below
for details.
This button shows the current voice guidance profile.
By tapping the button, you can select a new profile
from the list of available languages and speakers.
Tap any of these to hear a sample voice prompt.
Just tap
new spoken language.
Maps may contain information about the speed limits
of the road segments. iGo primo is able to warn you if
you exceed the current limit. This information may not
be available for your region (ask your local dealer), or
may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive
visible and/or audible warnings.
Adjust the slider to set the relative speed above which
the application initiates the warning.
The following alert types are available:
• Audio warning: you receive a verbal warning
when you exceed the speed limit with the given
percentage.
• Visual warning: the current speed limit is shown on
the map when you exceed it.
If you prefer to see the speed limit sign on the map
all the time (normally it is shown only if your speed
exceeds it), you can set it here.
VM9725BT
when you have selected the