Page 1 VM9725BT Navigation Operating Instructions watts peak 40W x 4...
Page 2 VM9725BT This page intentionally left blank.
Page 3: Warnings And Precautions
VM9725BT WARNINGS AND PRECAUTIONS WARNING! Please read and follow the following safety precautions. Failure to follow the instructions below may increase your risk of collision and personal injury. The Attention - Please Drive Safely! Screen is displayed each time the iGo primo software is turned ON as a reminder to make use of the system’s navigational aids...
Page 4: Vehicle Position
VM9725BT iGo primo software provides turn-by-turn visual and voice assistance to direct you to your selected destination. The software quickly calculates step-by-step directions to any destination available on the included navigation map. The iGo primo software uses Global Positioning System (GPS) satellites, and a digital roadway map database to calculate and display travel directions.
Page 5: Safety Information
VM9725BT SAFETY INFORMATION User Agreement When the unit is first turned on, you will see the following message, warning you to operate your navigation system appropriately: You must agree to the above notice before using the navigation software. to proceed to the Navigation Menu.
Page 6: Driver Safety Rules
VM9725BT Driver Safety Rules he following safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: • The driver should operate the device only when the vehicle is stopped. Only a vehicle passenger should operate the device while the vehicle is moving.
Page 7: Table Of Contents
VM9725BT WARNINGS AND PRECAUTIONS ..........3 Vehicle Position .
Page 8 VM9725BT MODIFYING THE ROUTE ........... .93 Selecting a New Destination When Already Having a Route .
Page 9: Quick Start Guide
VM9725BT QUICK START GUIDE Follow these six easy steps and you are on your way. NOTE: Before operating your iGo Primo software, please carefully read and follow the instructions provided in the “Warnings and Precautions” section of this manual. Step 1 - Access the navigation function: You can access the navigation function by pressing the front panel NAV button.
Page 10 VM9725BT Step 4 - Select a Destination: You have many ways to select a destination. Select by touching screen: • Tap to select your destination by entering an address or selecting a place of interest, a location on the map or one of your Favorite destinations.
Page 11 VM9725BT Step 6 - Arriving at Your Destination When you are near your destination, the destination is indicated by a checkered flag symbol Refer to the rest of this manual to become more familiar with the many options available on your iGo primo software.
Page 12: Introduction
• 4GB SD Card with Continental US, Alaska, Hawaii, and Puerto Rico • Latest Map Guarantee (Limited time only - Must be used within 90 days of initial activation) • Compatible with Jensen VM9725BT multimedia receiver Specifications • SiRF Prima Processor •...
Page 13: About Gps And Gnss
VM9725BT About GPS and GNSS The unit uses a vehicle Global Positioning System (GPS)-based navigation device which uses digital map data to guide you from your selected location A to location B, using location information obtained from a Global Navigation Satellite System (GNSS).
Page 14: Acquiring A Satellite Signal
VM9725BT Acquiring a Satellite Signal The initial GPS location lock is best established when your vehicle is parked. If the device is in motion, the signal can take longer to initially connect. Once the initial coordinates are established, the software will follow you as you move and navigate.
Page 15: Getting Started
VM9725BT GETTING STARTED iGO primo is optimized for in-car use. There is no need to use a stylus. You can use it easily by tapping the screen buttons and the map with your fingertips. Accessing the Navigation Software Press the MENU button and touch the Navigation icon to access navigation mode.
Page 16: Initial Setup
VM9725BT INITIAL SETUP When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: Select the written language of the application interface. Later you can change it in Regional settings. 2. Read the End User License Agreement. Tap to continue.
Page 17 VM9725BT 5. If needed, modify the time format and unit settings. Later you can change them in Regional settings. 6. If needed, modify the default route planning options. Later you can change them in Route settings. 7. The initial setup is now complete. The Configuration Wizard can be restarted later from the Settings menu.
Page 18: Navigation Menu
VM9725BT NAVIGATION MENU You can reach all parts of iGO primo from the Navigation Menu. You have the following options: • Tap to select your destination by entering an address or selecting a place of interest, a location on the map or one of your Favorite destinations.
Page 19: Buttons And Other Controls On The Screen
VM9725BT BUTTONS AND OTHER CONTROLS ON THE SCREEN When you are using iGO primo, you usually tap buttons on the touch screen. You only need to confirm selections or changes if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or settings.
Page 20 VM9725BT List When you need to Grab the list select from several anywhere and slide options, they your finger up or appear in a list. down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or until the end.
Page 21: Using Keyboards
VM9725BT Using Keyboards You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical.
Page 22: Beyond Single Screen Tap
VM9725BT Beyond Single Screen Tap You usually need to tap the screen only once. However, some useful features can be accessed with combined touch screen tapping. Those are the following: Action Details Tapping and holding the Tap and keep pressing the following buttons to reach screen.
Page 23: Map Screen
VM9725BT MAP SCREEN The Map screen is the most frequently used screen of iGO primo. Navigating On the Map A small live map is displayed on the startup screen, the Navigation Menu, as a part of the button. To enlarge this small map and open the Map screen, tap This map shows the current position (the Vehimarker, a red arrow by default), the recommended route (an orange line), and the surrounding map area.
Page 24 VM9725BT When GPS position is available, the Vehimarker is displayed in full color, now showing your current position. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data fields.
Page 25 VM9725BT Default data fields when cruising without a destination (tap and hold any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains Shows the current time corrected with time zone offset.
Page 26: Position Markers
VM9725BT Position Markers Vehimarker and Lock-on-Road When your GPS position is available, iGO primo marks your current position with the Vehimarker. By default, this marker is a red arrow, but you can change this icon in Settings. The exact location of the Vehimarker depends on the vehicle type used for route calculation.
Page 27: Objects On The Map
VM9725BT Objects On the Map Streets and Roads iGO primo shows the streets in a way that is similar to how the paper road maps show them. Their width and colors correspond to their importance: you can easily tell a freeway from a small street.
Page 28 VM9725BT Most of these icons are very intuitive. The following table lists some of the frequently shown route events. The same symbols are used in both fields: Icon Description Turn left. Turn right. Turn back. Bear right. Turn sharp left.
Page 29 VM9725BT Leave ferry. Approaching a waypoint. Approaching the destination. Lane Information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, iGO primo displays the lanes and their directions using small arrows at the bottom of the map.
Page 30 VM9725BT Junction View If you are approaching a freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. Signposts can also be present if information is available.
Page 31 VM9725BT Elements of the Active Route iGO primo shows the route in the following way: Symbol Name Description Current GPS position Your current position displayed on the and Start point map. • In pedestrian mode it is the exact GPS position.
Page 32: Manipulating The Map
VM9725BT Manipulating the Map Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify...
Page 33 VM9725BT Action Button(s) Description Moving the map No buttons You can move the map in any with drag & drop. direction: tap and hold the map, and move your finger towards the direction you want to move the map. Zooming in and Changes how much of the map is displayed on the screen.
Page 34 VM9725BT Compass in 2D The direction of the compass shows map view mode North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. Compass in 3D The direction of the compass shows map view mode North.
Page 35: Quick Menu
VM9725BT Quick Menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping The menu will close after a few seconds of inactivity or if you tap The menu will also close if you initiate simple controls like muting the device.
Page 36 VM9725BT There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button. The following options are available: Button Description Shortcut for: Master Volume slider This slider adjusts the sound More / Settings / Sound volume of the device.
Page 37 VM9725BT This button opens a special screen with information about the current position and a button to search for nearby emergency or roadside assistance. For details, see the next chapter. This button cancels the route My Route / Cancel and stops navigation. The...
Page 38 VM9725BT With this function you can My Route / More / Load replace the active route with a Route previously saved route. With this function you can Find / Find Places search for Places of Interest in various different ways.
Page 39: Where Am I
VM9725BT Checking the Details of the Current Position (Where Am I?) Opened from the Quick menu, this screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby.
Page 40 VM9725BT You can also perform some actions on this screen: to save the current position as a Favorite destination. You can also search for assistance near your current position. Tap open a new screen for the Quick search: The following services can be searched around the current position or the last known position: •...
Page 41: Navigating
VM9725BT NAVIGATING You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). • You can also plan a route independently of your current GPS position or even...
Page 42 VM9725BT Entering an Address (United States) To enter an address as the destination, do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. By default, iGO primo proposes the country and state where you are. If...
Page 43 VM9725BT • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the city/ town from the list.
Page 44 VM9725BT 6. Enter the house number: a. Tap b. Enter the house number on the keyboard. (To enter letters, tap c. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.)
Page 45 VM9725BT 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. Tip! If you know that you will use this destination frequently, before...
Page 46 VM9725BT Entering an Address (Canada) To enter an address as the destination, do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. By default, iGO primo proposes the country, state and city where you are. If...
Page 47 VM9725BT • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the city/ town from the list.
Page 48 VM9725BT 6. Enter the house number: a. Tap b. Enter the house number on the keyboard. (To enter letters, tap c. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.)
Page 49 VM9725BT 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 50 VM9725BT Entering an Address Starting with the Street Name (in the United States only) You can leave the city/town name empty and start the search with the street name. This way you can search in all streets of a state. Do as follows:...
Page 51 VM9725BT • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list.
Page 52 VM9725BT 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 53 VM9725BT Entering the Midpoint of a Street as the Destination You can navigate to the midpoint of a street if the house number is not available: If you are on the Map screen, tap to return to the Navigation menu.
Page 54 VM9725BT 5. Instead of entering the house number, tap . The midpoint of the street is selected as the destination. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location.
Page 55 VM9725BT Selecting an Intersection as the Destination To enter an address as the destination, do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3.
Page 56 VM9725BT 5. Enter the intersecting street name: • If only a few intersecting streets exist, their list appears immediately. • In case of a longer street, the keyboard screen appears. Start entering the name of the intersecting street on the keyboard.
Page 57 VM9725BT 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 58 VM9725BT Selecting a City/Town Center as the Destination The city/town center is not the geometric center of the city but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections.
Page 59 VM9725BT 5. Instead of entering the street name, tap . This way the center of the displayed city/town becomes the destination of the route. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location.
Page 60 VM9725BT Entering an Address with a ZIP Code All of the above address searching possibilities can be performed with entering the ZIP code instead of the city name. Find below an example with a full address: If you are on the Map screen, tap to return to the Navigation menu.
Page 61 VM9725BT 5. Enter the street name: a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap •...
Page 62 VM9725BT 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap to confirm the destination, or tap to select a different destination.
Page 63 VM9725BT Tips on Entering Addresses Quickly When you are entering the name of a city/town or a street: • Only those letters are offered on the keyboard that appear in possible search results. All other characters are grayed out. • As you are typing, the most likely result is always displayed in the input field. If the guess is correct, tap to select it.
Page 64: Selecting The Destination From The Places Of Interest
VM9725BT Selecting the Destination from the Places of Interest You can select your destination from the Places of Interest included with iGo primo. Using the same screen, you can find a Place in different ways: • with the Quick search feature, you can quickly find a nearby Place by its name •...
Page 65 VM9725BT 4. (Optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). If you need to reorder the list, tap 5.
Page 66 VM9725BT Searching for a Place of Interest Using Preset Categories The Preset search feature lets you quickly find the most frequently selected types of Places. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3.
Page 67 VM9725BT 4. Tap any of the quick search buttons to get an instant list of Places. 5. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour.
Page 68 VM9725BT 9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 69 VM9725BT Searching for a Place of Interest by Category You can search for Places of Interest by their categories and subcategories. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3.
Page 70 VM9725BT 5. (Optional) If you have selected , select the city/town to search 6. Select one of the main Place categories (e.g. Accommodation) or to list all Places around the selected location or along the route. 7. Select one of the Place subcategories (e.g. Hotel or Motel) or to list all Places in the selected main category around the selected location or along the route.
Page 71 VM9725BT 8. Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap to list all Places in the selected subcategory around the selected location or along the route. 9. Finally, the results appear in a list.
Page 72 VM9725BT 14. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 73 VM9725BT Searching for a Place of Interest by Name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only.
Page 74 VM9725BT 5. (Optional) If you have selected , select the city/town to search 6. Tap to search in all Places, or select one of the main Place categories (e.g. Accommodation) to search in. 7. Tap to search in the selected Place category or select one of the...
Page 75 VM9725BT 8. Tap if you have not done it before. 9. Using the keyboard, start entering the name of the Place. 10. After entering a few letters, tap to open the list of Places with names containing the entered character sequence.
Page 76 VM9725BT 12. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen.
Page 77 VM9725BT Selecting Nearby Assistance from ‘Where Am I?’ You can quickly search for nearby assistance from the ‘Where Am I?’ screen. On the Map screen, tap to open the Quick menu. 2. Tap , and then 3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): •...
Page 78 VM9725BT 4. Tap any of the quick search buttons to get an instant list of that type of Places. 5. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour.
Page 79 VM9725BT 8. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 9. After a short summary of the route parameters, the map appears showing the entire route.
Page 80: Selecting A Map Location As The Destination
VM9725BT Selecting a Map Location as the Destination If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Locate your destination on the map: move and scale the map as needed.
Page 81: Selecting The Destination From Your Favorites
VM9725BT Selecting the Destination from Your Favorites You can select a location that you have already saved as a Favorite to be your destination. Access the list of Favorites: • If you are on the Map screen, tap and then tap •...
Page 82 VM9725BT 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 83: Selecting One Of The Most Likely Destinations (Smart History)
VM9725BT Selecting One of the Most Likely Destinations (Smart History) The destinations that you have set earlier appear in the History list. Two of those recent destinations are shown in the Destination menu for easy access. Smart History offers these locations based on your navigation habits, using parameters like the current time of day, the day of week, and the current location.
Page 84 VM9725BT 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 85: Selecting A Recent Destination From The History
VM9725BT Selecting a Recent Destination from the History The destinations that you have set earlier appear in the History. Access the History: • If you are on the Map screen, tap and then tap • If you are in the Navigation menu, tap and then tap 2.
Page 86 VM9725BT 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey.
Page 87: Entering The Coordinates Of The Destination
VM9725BT Entering the Coordinates of the Destination You can also select a destination by entering its coordinate. Do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3.
Page 88 VM9725BT 7. A full screen map appears with the selected point in the middle. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route.
Page 89: Building A Route From The List Of Destinations (Create Route)
VM9725BT Building a Route from the List of Destinations (Create Route) You can also build your route destination by destination from the My Route menu. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3.
Page 90 VM9725BT 7. When the new destination is selected, the list returns. 8. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure.
Page 91: Viewing The Entire Route On The Map
VM9725BT VIEWING THE ENTIRE ROUTE ON THE MAP It is easy to get a map overview of the active route. Do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3.
Page 92: Checking Route Parameters
VM9725BT CHECKING ROUTE PARAMETERS AND ACCESSING ROUTE RELATED FUNCTIONS You can check different parameters of the route recommended by iGo primo. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3.
Page 93: Modifying The Route
VM9725BT MODIFYING THE ROUTE When navigation is already started, there are several ways to modify the active route. The following sections show some of those options. Selecting a New Destination When Already Having a Route: New Route, Waypoint or Final Destination...
Page 94: Setting A New Starting Position For The Route
VM9725BT Setting a New Starting Position for the Route For normal navigation, all routes are planned from the current position. In order to check future routes, simulate them or see their length in time and distance, you can turn off the GPS receiver. Then you can set the starting point of the route to a different location than the current GPS position.
Page 95 VM9725BT 4. The first line is the start of the route, normally the current GPS position. and confirm your action at the warning message. 5. The Destination menu appears and you can select the start point of the route the same way you select a destination.
Page 96: Editing The List Of Destinations (Edit Route)
VM9725BT Editing the List of Destinations (Edit Route) You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. If you are on the Map screen, tap to return to the Navigation menu.
Page 97: Pausing The Active Route
VM9725BT Pausing the Active Route You do not need to pause the active route: when you start driving again, iGo primo restarts the voice instructions from your position. Canceling the Active Route To cancel the navigated route, do one of the following: •...
Page 98: Checking Route Alternatives When Planning The Route
VM9725BT Checking Route Alternatives when Planning the Route You can select from different route alternatives or change the route planning method after you have selected a new destination. Do as follows: Select a destination as explained earlier, and go to the route confirmation screen.
Page 99: Checking Route Alternatives For An Existing Route
VM9725BT 5. Or if you cannot find a good alternative, tap and scroll down for routes with different routing methods. 6. Select one of the route alternatives and tap to return to the previous screen. iGo primo recalculates the route. The orange line now shows the new recommended route.
Page 100 VM9725BT 3. Tap 4. Tap 5. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 6. Or if you cannot find a good alternative, tap and scroll down for routes with different routing methods.
Page 101: Changing The Vehicle Used In Route Planning
VM9725BT Changing the Vehicle Used in Route Planning To recalculate the active route for a different vehicle, do as follows. These changes can also be made in Settings. On the Map screen, tap and then tap 2. Tap and then tap one of the following: •...
Page 102: Changing The Road Types Used In Route Planning
VM9725BT Changing the Road Types Used in Route Planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. On the Map screen, tap and then tap 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types.
Page 103: Saving A Location As A Favorite Destination
VM9725BT SAVING A LOCATION AS A FAVORITE DESTINATION You can add any location to Favorites, the list of frequently used destinations. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken.
Page 104: Saving A Location As An Alert Point
VM9725BT SAVING A LOCATION AS AN ALERT POINT You can save any map location as an alert point (for example a speed camera or a railroad crossing). Browse the map and select a location. The red Cursor appears there. 2. Tap 3.
Page 105: Editing An Alert Point
VM9725BT EDITING AN ALERT POINT You can edit a previously saved or uploaded alert point (for example a speed camera or a railroad crossing). Browse the map and select the alert point to edit. The red circle appears around the alert point.
Page 106: Watching The Simulation Of The Route
VM9725BT WATCHING THE SIMULATION OF THE ROUTE You can run a simulated navigation that demonstrates the active route. Do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3.
Page 107 VM9725BT 5. (Optional) You have the following controls during the simulation (the control buttons disappear after a few seconds but you can open them again if you tap the map): • : Jump to the next route event (maneuver). •...
Page 108 VM9725BT This page intentionally left blank.
Page 109: Reference Guide
VM9725BT REFERENCE GUIDE On the following pages you will find the description of the different concepts and menu screens of iGo primo. CONCEPTS Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction.
Page 110: Route Calculation And Recalculation
VM9725BT Route Calculation and Recalculation iGo primo calculates the route based on your preferences: Route planning methods: • : Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars.
Page 111 VM9725BT • Maneuver restrictions and directional constraints (if they are applied to bicycles in the map data) are taken into account when planning a route. • Roads are used only if access for bicycles or pedestrians is allowed. • Controlled-access roads are excluded from routes.
Page 112 VM9725BT Road types used or avoided in route calculation: • • • • • • Whenever data exist, route calculation takes into account statistical traffic data for the given day of week and time of day. Real-time Traffic events are also taken into account and sometimes greatly modify the route.
Page 113: Green Routing
VM9725BT Green Routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment.
Page 114: Road Safety Cameras And Other Proximity Alert Points
VM9725BT Road Safety Cameras and Other Proximity Alert Points There is a special proximity warning for road safety cameras (like speed or red light cameras) and other proximity alert points (like schools or railroad crossings). These alert points are preloaded in iGo primo. You can download more from www.
Page 115: Gps Position Quality Indicators
VM9725BT GPS Position Quality Indicators You can find useful information in the top corners of menu screens. In the top right corner, the GPS reception quality icon shows the current accuracy of the position information. Icon Description iGo primo has no connection to the GPS receiver: GPS navigation is not possible.
Page 116: More' Menu
VM9725BT ‘MORE’ MENU The ‘More’ menu provides you with various options and additional applications. Tap the following buttons: Button Description You can configure the program settings, and modify the behavior of iGo primo. Fine-tune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, etc.
Page 117 VM9725BT If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile.
Page 118: Settings Menu
VM9725BT SETTINGS MENU You can configure the program settings, and modify the behavior of iGo primo. Tap the following buttons: The Settings menu has several options. Tap or scroll with your finger to see the full list. Button Description Adjust the sound volume, mute your device or change the voice guidance language.
Page 119 VM9725BT You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or...
Page 120: Sound And Warnings
VM9725BT Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application.
Page 121 VM9725BT This feature allows you to receive a warning when approaching a Road Safety Camera. You must ensure on your own liability that using this feature is legal in the country where you intend to use it. This button is not displayed when GPS position is not available or if you are in certain countries where road safety camera warning is prohibited.
Page 122 VM9725BT You can control the volume of the following sound types: Button Description This is the main volume control. These controls affect all below sounds. They can also be accessed from the Quick menu. These controls affect the volume of the guidance sounds (verbal instructions).
Page 123: Customize Quick Menu
VM9725BT Customize Quick Menu The content of the Quick menu is fully customizable. Tap the button you want to change, and select its new function from the list. Traffic Settings The recommended route is not always the same between two points.
Page 124: Route Settings
VM9725BT Route Settings These settings determine how routes will be calculated. Button Description You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation.
Page 125 VM9725BT iGo primo excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. Carpool or HOV lanes can be used if a given number of passengers are traveling in the vehicle. You should check whether you are allowed to use carpool lanes before enabling this road type.
Page 126 VM9725BT • • All maneuvers are available in intersections. • Directional constraints are taken into account the way that opposite direction is allowed with a low speed. • A private road is used only if the destination is there. • Walkways are excluded from routes.
Page 127: Green Routing Settings
VM9725BT Green Routing Settings These settings determine how Green routes will be calculated. They are also used to display the cost and CO2 emission of routes. Button Description Enter the average consumption of your vehicle when used in built-up areas.
Page 128: Map Settings
VM9725BT Map Settings You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to show on the map).
Page 129 VM9725BT Show or suppress 3D city models, 3D artistic or block representation of full city building data containing actual building size and position on the map. Turn on or off track log saving, that is, saving the sequence of the locations your journeys go through.
Page 130: Visual Guidance Settings
VM9725BT Visual Guidance Settings Settings related to guidance on the map screen can be adjusted here. Button Description The data fields in the corner of the Map screen can be customized. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
Page 131: Display Settings
VM9725BT Display Settings Display related settings include menu animations, separate skins for daytime and night use and the brightness of the display. Button Description When animation is turned on, buttons on menus and keyboard screens appear in an animated way. Screen transitions are also animated.
Page 132: Trip Monitor Settings
VM9725BT Trip Monitor Settings Trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu.
Page 133: Glossary
VM9725BT GLOSSARY 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Page 134 VM9725BT North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. See also: Track-up map orientation. Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available.
Page 135: End User License Agreement
VM9725BT END USER LICENSE AGREEMENT 1 The contracting parties 1.1 This Agreement has been entered into by and between NNG Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement.
Page 136 VM9725BT 4.5 Your rights under this Agreement will terminate immediately without notice from Licensor if you materially breach it or take any action in derogation of Licensor’s and/or its licensors’ rights to the Software Product. Licensor may terminate this Agreement should any Software Product become, or in Licensor’s reasonable opinion likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation.
Page 137 VM9725BT 7.1.3 to translate the Software Product (including translation (compilation) to other programming languages); 7.1.4 to decompile the Software Product; 7.1.5 to evade the protection of the Software Product or to modify, circumvent or obviate such protection through technological or by any other means;...
Page 138 VM9725BT 8.5 The Licensor also draws the attention of the User to the fact that, when using the Software Product in any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable and suitable security measures,...
Page 139 VM9725BT 9.4 Contents and services provided by the Licensor or an agent of the Licensor The Licensor or a contractual partner may offer various products and services to the User through www.naviextras.com. The User may only use these services when the User has read and understood the relevant end user license agreement(s) at www.naviextras.com and the User is obliged to use the services in line with the...
Page 140 Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2012 Audiovox Printed in China 128-9064...

Jensen VM9725BT Operating Instructions Manual

Quick Links

Related Manuals for Jensen VM9725BT

Summary of Contents for Jensen VM9725BT

Table of Contents