Getting Started; Accessing The Navigation Software; Adjusting The Navigation Voice Volume - Jensen VM9725BT Operating Instructions Manual

VM9725BT

GETTING STARTED

iGO primo is optimized for in-car use. There is no need to use a stylus. You can use
it easily by tapping the screen buttons and the map with your fingertips.

Accessing the Navigation Software

Press the MENU button and touch the Navigation icon to access navigation mode.

Adjusting the Navigation Voice Volume

While the Navigation is on and a route has been programmed, the Navigation will
speak commands. While the Navigation is speaking, adjust the volume by turning
the radio volume knob. The Navigation volume will remain at this level and when
done speaking will return to the previous source (ie, radio) at the volume level set
for that source.
The main volume must be set above zero in order to hear the spoken directions.
If the radio is muted, the Bluetooth (if equipped) engaged in a call, or the volume
knob has been turned to zero, the navigation will not be heard but your visual
directions will continue.
Selecting / Listening to a Source while Navigating
While navigating, other sources may be selected and listened to such as AM-FM
Tuner, CD, etc. To listen to another source while navigating, press the SRC button
and then select a source from the Source Menu. Navigation voice prompts will be
heard automatically, although the navigation map cannot be seen. To view the
navigation screen, but continue to listen to the selected source, press the NAV/
WIDE button.
15