Parking Brake Inhibit - Jensen VM9725BT Operating Instructions Manual

VM9725BT
System Reset
To correct a system halt or other illegal operation, use
the tip of a pen to press the reset button located over the
rotary encoder. After a system reset, the unit restores all
factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the
reset is complete.
Image/Display Settings
Video Output Modes
Table 3 shows the video output mode for each playing source.
Playing Source
AM/FM TUNER
DVD
AUX IN
*CVBS – Composite Video Baseband Signal

Parking Brake Inhibit

• When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
Table 3: Video Output Modes
Video Output Modes
YCbCr Mode
YCbCr Mode
CVBS* Mode
[RESET] Button
21