Network - Samsung SRM-872 User Manual

Network

Set IP address
1. Press Menu and move to 'Network->Address-
>WAN' page.
2. Set one of IP address type.
*No IP address setup required in 'DHCP' option.
3. In 'Static IP' option, you need to enter 'IP
address, Subnet mask and Gateway'.
4. Press 'OK' to save changes.
* To change communication port, move to 'PORT'
page in this menu.
PoE Setup (Power Over Ethernet)
1. Press Menu and move to 'Network->Address-
>PoE' page
2. Set IP address and Subnet mask
3. Check 'DHCP server' option. When use this
system as DHCP server, must set IP ranges
which will assigned to connected IP cameras.
* connected camera should be set on DHCP
option.
4. Press 'Ok' to save changes.
36