Transporting The Boiler; Lifting And Handling The Boiler - Buderus Logano plus GB312 Installation And Service Instructions Manual

3

Transporting the boiler

This section describes how to move the boiler safely and without
damaging it.
CAUTION: Risk of system damage from impacts.
The standard boiler includes parts that are sensitive to
impact.
▶ If the boiler has to be moved after delivery, protect all
components against shocks and impacts.
▶ Observe the transport instructions on the packaging.
If the boiler is not to be installed immediately, protect
the connections from entry of dirt.
Dispose of packaging in an environmentally-responsible
manner.
3.1

Lifting and handling the boiler

CAUTION: Risk of injury through carrying heavy loads.
▶ Always lift and move the appliance with the
assistance of another person and use the grip
positions shown.
▶ Secure the boiler against slipping.
The boiler can be carried to its installation site using 2 pipes (1¼ ",
approx. 80 inches long).
▶ Unscrew the locking screw from the top center of the boiler's front
cover.
▶ Lift font panel slightly and draw forwards to remove.
▶ Unscrew the locking screws from the side panels at the front and
back of the boiler.
▶ Slightly lift the side panels and remove.
Logano plus GB312 – 6 720 806 273 (2013/01)
Fig. 5 Removing front cover and side panels
[1] Front panel
[2] Side panel
[3] Locking screw
▶ Unscrew the securing screws.
▶ Lift the boiler off the pallet.
1
Fig. 6 Lifting the boiler off the pallet
[1] Locking screw
[2] Pallet
▶ Push the pipes through the holes at the front and rear of the boiler
( Fig. 7, page 14).
▶ Secure the pipes at the positions shown in Fig. 7 to prevent slipping,
for example, by using adhesive tape.
▶ Carry the boiler to the installation site.
Transporting the boiler
2
7 747 010 720-06.1RS
3
1
13