Table of Contents
Advertisement
6. OTHERS MENU
6.3
Display Setting Menu
The [Display Setting] menu sets various display-related items according to operator's
preference. To display the menu, open the main menu then select the [Others] and
[Display Setting] menus.
Mode Selection: Determines how display modes are chosen: MODE key or pull-down
menu.
Echo Disp Area: Selects the echo display mode for the horizontal display, [Within
Range] or [Full Screen]. See page 1-7.
H2 Display: Selects the combination mode of two horizontal displays: Landscape,
Portrait, or Inset.
2nd Monitor Setting: When two monitors are connected, select the combination
mode for the sub-display; Landscape or Portrait. This function is available only when
[Dual Display] is selected at [2nd Monitor Setting] on [Others]-[Initial Setting] menu.
V-Scan Aspect Ratio: Selects the type of the horizontal to vertical ratio to use on the
V-display; Fixed or Flexible.
Presentation Mode: Selects presentation mode. Head-up, North-up, Course-up and
true motion (requires ship's speed and heading data) are available.
TM Disp Range: Selects how many times to expand the display range in the true mo-
tion mode. 1.3R (R=Range) and 1.6R are available.
Note: When you set [TM Disp Range] to 1.3R and [Full Screen Area] to 1.6R, the full
screen area for the TM mode becomes 1.6R.
Full Screen Area: Selects a configuration for the full screen display, 1.3R or 1.6R.
6-3
Advertisement
Table of Contents
Troubleshooting
