Appendix 1 Menu Tree - Furuno FSV-35 Operator's Manual

APPENDIX 1 MENU TREE

[MENU/ESC] key
TX/RX Setting TX Interval (0 to 9; 9) [H1/H2], U: Yes/F: Yes
U: No /F: Yes TX Pulse Length (0 to 9; 7 [H1], 9 [H2/V]), U: Yes/F: Yes
TX Power (0 to 9; 7 [H1], 9 [H2/V]), U: Yes/F: Yes
Reverberation (0 to 5; 0), [H1/H2/V], U: Yes/F: Yes
Freq Shift (-30 to 30; 0 [H1], 7 [H2/V]), U: YesF: Yes
Freq/Bearing Set (0 to 31; 16), [H1/H2], U: Yes/F: Yes
Beam Width, U: No/F: Yes
Bottom Suppress (0 to 10; 0), [H1/H2/V], U: Yes/F: Yes
Gain Setting TVG-Near (-5 to 5; 5 [H1], 2 [H2], 3 [V]), U: Yes/F: Yes
U: No/F: Yes TVG-Medium (-5 to 5; 2 [H1], 3, [H2], 0 [V]), U: Yes/F: Yes
TVG-Far (-5 to 5; 2 [H1], 4 [H2], 0 [V]), U: Yes/F: Yes
TVG Distance [H1/H2/V], U: No/F: No
Sel. TVG Curve (TVG 1, TVG 2, TVG 3, TVG 4) [H1/H2/V], U: Yes/F: Yes
AGC (0 to 9; 2 [H1/H2], 3 [V]), U: Yes/F: Yes
Near AGC, U: No/F: Yes
2nd AGC, U: No/F: Yes
Display Setting Noise Limiter (0 to 15; 6 [H1/H2], 3 [V]), U: Yes/F: Yes
U: No/F: Yes Gain Offset (0 to 12; 1 [H1/H2], 3 [V]), U: Yes/F: Yes
Signal Level (0 to 15; 4 [H1/H2], 3 [V]), U: Yes/F: Yes
Color (Color 1, Color 2, Color 3, Color 4) [H1/H2/V], U: Yes/F: Yes
Color Response (Corlor Curve 1, Color Curve 2, Color Curve 3, Color Curve 4;
Color Curve 1 [H1/H2], Color Curve 4 [V]), U: Yes/F: Yes
H-Scan Color Setting [H1/H2/V], U: No/F: No
H-Scan Color Curve Setting [H1/H2/V], U: No/F: No
Picture Setting Echo Average (0 to 11; 1 [H1/V], 2 [H2]), U: Yes/F: Yes
U: No/F: Yes Int Reject (0 to 3; 2 [H1], 0 [H2/V]), U: Yes/F: Yes
Smooth Echo RNG (0 to 7; 3 [H1], 2 [H2], 1 [V]), U: Yes/F: Yes
Smooth Echo CIR (0 to 5; 0) [H1/H2/V], U: Yes/F: Yes
Others Erase Marks
U: No/F: Yes U: No/F: Yes
Wheel Setting
U: No/F: Yes
1 2
*: Setting range can be changed on the system menu. For details, contact your dealer.
Beam (AR, -4 to 30; 5 [H1], 4 [H2]), (0 to 5; 5) [V], U: Yes/F: Yes
Near AGC (-30 to 30; 0 [H1/V], 3 [H2]), U: Yes/F: Yes
Near AGC Distance (20 to 500 (or 3000)* m; 200m [H1/V], 300m [H2]) ,
U: Yes/F: No
2nd AGC (0 to 12; 7 [H1], 5 [H2], 0 [V]), U: Yes/F: Yes
Distance (0 to 2000 m; 0m) [H1/H2/V], U: Yes/F: No
Type (Normal, Pre Only, Post Only) [H1/H2/V], U: Yes/F: No
Event Mark1 (Execute), U: Yes/F: Yes
Event Mark2 (Execute), U: Yes/F: Yes
Fish Mark (Execute), U: Yes/F: Yes
Own Ship Pos Mark (Execute), U: Yes/F: Yes
Ship's Track (Execute), U: Yes/F: Yes
H Mode (Tilt Angle, Range, Gain), U: Yes/F: Yes
V Mode (Range, Gain, Bearing), U: Yes/F: Yes
U: Items which can be
programmed to the user menu.
F: Items which can be
programmed to a function key.
Defaut settings in bold italic.
AP-1