Furuno FSV-35 Operator's Manual page 132

8. MAINTENANCE, TROUBLESHOOTING
5. Turn the crank clockwise to raise the transducer. Also, you can raise the transduc-
er with a socket wrench or impact wrench, using the socket near the crank. If an
impact wrench is used the torque should be 14.5 Nm (1.48 kgfm)
6. After retracting the transducer into the tank, set the release lever to the holder as
shown below.
8-14
Lower
Release lever
Holder
Set release lever
to holder.
Raise