Furuno FSV-35 Operator's Manual page 102

6. OTHERS MENU
Monitor Setting menu
The [Monitor Setting] menu sets the function of dual monitors. Select [Monitor Setting]
on the [Initial Setting] menu then push the left-click button.
2nd Monitor Setting: Selects the display format for the sub monitor (Off, Dual Dis-
play, Sub Display).
• OFF: Select if a single monitor is connected.
• Dual Display: Main and sub monitors show different pictures in the combination dis-
play mode.
• Sub Display: Main and sub monitors show the same picture in the combination dis-
play mode.
Display mode
Main monitor
H2 H1
V1 H
V2 H
Note: Turn the power off and on again after you change this setting.
Data Display menu
The [Data Display] menu sets the readout format for the marks on the display. Select
[Data Display] on the [Initial Setting] menu then push the left-click button. This menu
is also shown on the pop-up menu.
Data Display: Turns the numeric/graphic data display on/off.
Data Box Transp.: Select [ON] to make the numeric/graphic data box transparent.
6-8
Dual Display
Sub monitor
H2
V1
V1/V2
Sub Display
Main monitor
H1/H2 H1/H2
H/V1 H/V1
H/V1/V2 H/V1/V2
Sub monitor