Display Test Menu; Ship Data Menu - Furuno DS-30 Operator's Manual

Item
Scale Unit
Speed Resolution
Level
Current Direction
Wind Direction
Bottom Hardness
Beep sound
System Default

Display Test Menu

Item
Panel Test
Color Test
Pixel Test
Gradation

Ship Data Menu

Item
Reference Specify a reference point for measurement of the ship's data.
Point
Loa Set ship's length overall.
B Set ship's breadth.
L1
L2
L3
L4
L5
L6
D1 Set distance between DS-30 and #1 transducer echo sounders.
D2 Set distance between DS-30 and #2 transducer echo sounders.
Choose the distance scale unit for the X-axis of the
berthing mode and the under-keel clearance graphic
display.
Choose the resolution level for the ship's speed readout.
Choose "Normal" so that the water current direction
readout shows the direction toward which water moves.
Choose "Normal" so that wind direction readout shows
the direction from which the wind blows.
Choose whether to display bottom hardness level on the
under-keel clearance graphic display.
Choose tone/pattern of the audible alarm.
Restore factory settings on all the system menus, erasing
present settings.
Test the keys and trackball on the operation panel.
Check display colors.
Check RGB pixels of color LCD screen.
Check gradation of color LCD screen.
Description
Description
Description
11-2
Selection
1. m
2. NM
1. xx.xx
2. xx.x or xx.xx
1. Normal
2. Opposite
1. Normal
2. Opposite
1. Yes
2. No
1/2/3/4
Selection
1. Bow
2. Sten
50.0 to 400.0 m
5.0 to 100.0 m
0.0 to 30.0 m