Appendix 1 Menu Tree - Furuno FSV-85 Operator's Manual

APPENDIX 1 MENU TREE

[MENU/ESC] key
TX/RX Setting TX Interval (External KP, 1 to 9; 9) [H1/H2/S], U: Yes/F: Yes
U: No /F: Yes TX Pulse Length (0 to 9; 7) [H1/H2/S/V], U: Yes/F: Yes
TX Power (0 to 9; 9) [H1/H2/S/V], U: Yes/F: Yes
Frequency, U: No/F: Yes
Sidelobe Sup., U: No/F: Yes
Reverberation (0 to 3; 0) [H1/H2/S/V], U: Yes/F: Yes
Beam Width, U: No/F: Yes
Gain Setting TVG-Near (-5 to 5; 5) [H1/H2/S/V], U: Yes/F: Yes
U: No/F: Yes TVG-Medium (-5 to 5; 4) [H1/H2/S/V], U: Yes/F: Yes
TVG-Far (-5 to 5; 2) [H1/H2/S/V], U: Yes/F: Yes
TVG Distance [H1/H2/S/V], U: No/F: No
Sel. TVG Curve (TVG 1, TVG 2, TVG 3, TVG 4) [H1/H2/S/V], U: Yes/F: Yes
AGC (-20 to 20; 0) [H1/H2/S/V], U: Yes/F: Yes
Near AGC, U: No/F: Yes
2nd AGC, U: No/F: Yes
Absorption Coeff.(AUTO, 0.0 to 32.0 dB; 27.5dB) [H1/H2/S/V]
Gain Control (Normal, Wide) [H1/H2/S/V], U: Yes/F: Yes
Display Setting Noise Limiter (0 to 15; 7) [H1/H2/S/V], U: Yes/F: Yes
U: No/F: Yes Gain Offset (0 to 12; 5) [H1/H2/S/V], U: Yes/F: Yes
Signal Level (0 to 15; 3) [H1/H2/S/V], U: Yes/F: Yes
Color (Color 1, Color 2, Color 3, Color 4) [H1/H2/S/V], U: Yes/F: Yes
H-Scan Color Setting [H1/H2/S/V], U: No/F: No
1
S-Scan Color Curve Setting [H1/H2/S/V], U: No/F: No
Freq Shift1 (-65 to 65; 0) [H1/H2/S/V],
U: Yes/F: Yes
Freq Shift2 (-65 to 65; -65) [H1/H2/S/V],
U: Yes/F: Yes
Freq/Bearing Set (0 to 358 ; 0 ) [H1/H2], U: Yes/F: Yes
Sidelobe Sup.A (-3 to 4; 3) [H1/H2/S], (-3 to 3; 3) [V], U: Yes/F: Yes
Sidelobe Sup.B (-5 to 5; 0) [H1/H2/S/V], U: Yes/F: Yes
Sidelobe Dir1 (0 to Sidelobe Dir2; 60 ) [H1/H2/S], U: Yes/F: Yes
Sidelobe Dir2 (Sidelobe Dir1 to 180 ; 120 ) [H1/H2/S], U: Yes/F: Yes
Beam Control (Manual, Range, Tilt) [H1/H2/S],
Manual, Range) [V], U: Yes/F: Yes
TX Beam Width (-4 to 3; 0) [H1/H2/S/V], U: Yes/F: Yes
Hor. RX Beam Wid (-4 to 3; 0) [H1/H2/S/V], U: Yes/F: Yes
Ver. RX Beam Wid (-4 to 3; 0) [H1/H2/S/V], U: Yes/F: Yes
RX Beam Control (0 to 3; 0) [H1/H2/S/V], U: Yes/F: Yes
Near AGC (-20 to 20; 2) [H1/H2/S/V], U: Yes/F: Yes
Near AGC Distance (20 to 2000 m; 100m) [H1/H2/S/V], U: Yes/F: No
2nd AGC (0 to 20; 5) [H1/H2/S/V], U: Yes/F: Yes
Distance (0 to 2000 m; 60m) [H1/H2/S/V], U: Yes/F: No
Type (Small, Pre Only, Post Only) [H1/H2/S/V], U: Yes/F: No
Post2nd AGC-Near (0 to 20; 0) [H1/H2/S], U: Yes/F: Yes
Post2nd AGC-Far (0 to 20; 0) [H1/H2/S], U: Yes/F: Yes
Post2nd AGC Dist (0 to 2000 m; 0 m) [H1/H2/S], U: Yes/F: Yes
Exclusive Rng S (+0 to +90 ; +0 ) [H1/H2], U: Yes/F: Yes
U: Yes/F: Yes
U: Items which can be
programmed to the user menu.
F: Items which can be
programmed to a function key.
Defaut settings in bold italic.
AP-1