Changing The Rs-5/9'S Settings All At Once (Selecting Performances) - Roland RS-5 Owner's Manual

Using the Convenient Functions in Performances
Changing the RS-5/9's Settings All At
Once (Selecting Performances)
The group of Tones and Drum Sets assigned to the sixteen Parts is known as
a "Performance."
fig.Q-67exp
Performance
Part 1
Tone/
Drum Set
You can record the Tone numbers assigned to Parts as well as the Key Mode,
Arpeggio, Transpose, and other settings to the Performance.
If you store a group of settings in a Performance, you can then call up those
settings instantly by simply selecting that Performance.
Performances, just like Tones, are divided into two groups.
User
Although this area comes provided with 128 prepared Performances, you
can overwrite these with Performances that you create.
Preset
This area holds 128 prepared Performances; these cannot be overwritten or
replaced. But you can call up preset Performance settings into the
temporary area, modify them, and then store them in user memory.
fig.Q-68
56
Part 16
1 2 3 4