Settings And Convenient Functions; Basic Procedure For Utility Operations; Initializing A Usb Flash Drive (Format); Backing Up All Settings - Roland Jupiter-50 Owner's Manual

Settings and Convenient Functions

Access the UTILITY MENU screen to select the desired setting or
function.
Basic Procedure for Utility
Operations
1.
In the Menu screen (p . 35), choose "Utility" and press the
[ENTER] button .
The UTILITY MENU screen will appear.
2.
Select the function that you want to execute, and press
the [ENTER] button .
Menu Explanation
Backup Saves user data to a USB flash drive.
Restores the JUPITER-50's settings
Restore
from a USB flash drive.
Format the USB flash drive that's
Format USB Mem connected to the USB MEMORY
connector.
Resets the JUPITER-50 to its factory
Factory Reset
settings.
Regist Set Exchange Exchanges Registration Sets.
Changes the order of the registra-
Reg Move/Exchang
tions, or exchanges the numbers of
two registrations.
Writes JUPITER-50 sound data to a
Export
USB flash drive.
Reads previously exported data from
Import
a USB flash drive into the JUPITER-50.
Initializing a USB Flash Drive
(Format)
This operation will initialize (format) a USB flash drive.
NOTE
When you execute this operation, all data saved on the USB
flash drive will be lost. If the USB flash drive contains important
data, back it up to your computer before initializing the USB
flash drive.
1.
In the UTILITY MENU screen (p . 37), choose "Format USB
Mem" and press the [ENTER] button .
A message will ask "Are you sure?"
2.
To initialize, press the [F5] (OK) button .
NOTE
Never turn off the power while an USB flash drive is being
formatted.
70

Backing Up All Settings

You can back up all of settings in the JUPITER-50 to a USB flash drive
(sold separately), or restore those settings into the JUPITER-50's
memory.
MEMO
One set of backup data can be saved on a USB flash drive.
NOTE
• When you execute the backup operation, the backup data that
is currently saved on the USB flash drive will be overwritten. If
you want to keep the backup data that's on the USB flash drive,
copy it to your computer as described in "Backing Up USB Flash
Drive Data to a Computer" (p. 71).
• Never insert or remove a USB flash drive while this unit's power
is on. Doing so may corrupt the unit's data or the data on the
USB flash drive.
• Carefully insert the USB flash drive all the way in-until it is firmly
in place.
• Use USB flash drive available from Roland. Proper operation
cannot be guaranteed if other USB device is used.
• Don't connect anything other than a USB flash drive to the USB
Page
MEMORY connector.
p. 70

Backing Up to a USB Flash Drive

p. 70
p. 70
1.
In the UTILITY MENU screen (p . 37), choose "Backup" and
press the [ENTER] button .
p. 79
A message will ask "Are you sure?"
p. 71
2.
To execute, press the [F5] (OK) button .
p. 73
NOTE
p. 74
Never turn off the power while the backup operation is
p. 72 occurring.
p. 72
Restoring Backed-up Settings from a USB
Flash Drive
1.
In the UTILITY MENU screen (p . 37), choose "Restore" and
press the [ENTER] button .
A message will ask "Are you sure?"
NOTE
When you execute the Restore operation, all settings currently
saved in the JUPITER-50 will be lost. If you want to keep the
current settings, back them up to a different USB flash drive.
2.
To execute, press the [F5] (OK) button .
NOTE
Never turn off the power while the restore operation is
occurring.