3
Press [USER/PRESET] to select the group (User, Preset).
4
Press the numeric keys ([1]–[0]) to specify the Tone or Drum
Set number.
5
Press [ENTER] to finalize the entry.
The Tone number or Drum Set number appears in the display.
Changing the Two Parts Being Used
Two Parts (Upper and Lower) are used when Key Mode is set to Split or
Dual. You can select which of the 16 Parts will be the Upper Part and which
will be the Lower Part.
fig.Q-39
1
Press [EDIT], getting the indicator to light.
2
Use VALUE [-]/[+] to select "Tone/Drum/PFMCommon."
3
Press [ENTER].
Playing Two Tones on the Keyboard
2
If you make a mistake,
press [EXIT] and specify
the number once more.
Instead of using Steps 4
and 5, you can also switch
Tones by pressing VALUE
[-]/[+].
These settings can be made
for each Performance (p. 56)
individually.
1
3
39