00: Through; 01: Stereo Eq (Stereo Equalizer) - Roland RS-5 Owner's Manual

Chapter 6. Effect Settings
Send Levl to Cho
(Multi-effect send level to chorus)
Sets the amount of the multi-effects sound that is sent to the
chorus. Higher values result in more sound being sent.
Value: 0–127
* This parameter is included in all multi-effects types.
Send Levl to Rev
(Multi-effect send level to reverb)
Sets the amount of the multi-effects sound that is sent to the
reverb. Higher values result in more sound being sent.
Value: 0–127
* This parameter is included in all multi-effects types.

00: THROUGH

Effects are not applied. Select when creating Tones or Drum
Sets that do not use multi-effects.

01: STEREO EQ (Stereo Equalizer)

This is a four-band stereo equalizer (low, mid x 2, high).
fig.MFX-01
L in
4-Band EQ
R in
4-Band EQ
Low Freq (Low Frequency)
Select the frequency of the low range (200 Hz/400 Hz).
Value: 200, 400 [Hz]
Low Gain
Adjust the gain of the low frequency.
Value: -15– +15 [dB]
High Freq (High Frequency)
Select the frequency of the high range (4000 Hz/8000 Hz).
Value: 4000, 8000 [Hz]
High Gain
Adjust the gain of the high frequency.
Value: -15– +15 [dB]
Mid1 Freq (Middle 1 Frequency)
Adjust the frequency of Middle 1 (mid range).
Value: 200–8000 [Hz]
82
L out
R out
Mid1 Q (Middle 1 Q)
This parameter adjusts the width of the area around the
Middle 1 Frequency that will be affected by the Gain setting.
Higher values of Q will result in a narrower area being
affected.
Value: 0.5, 1.0, 2.0, 4.0, 8.0
Mid1 Gain (Middle 1 Gain)
Adjust the gain for the area specified by the Middle 1
Frequency and Q settings.
Value: -15– +15 [dB]
Mid2 Freq (Middle 2 Frequency)
Adjust the frequency of Middle 2 (mid range).
Value: 200–8000 [Hz]
Mid2 Q (Middle 2 Q)
This parameter adjusts the width of the area around the
Middle 2 Frequency that will be affected by the Gain setting.
Higher values of Q will result in a narrower area being
affected.
Value: 0.5, 1.0, 2.0, 4.0, 8.0
Mid2 Gain (Middle 2 Gain)
Adjust the gain for the area specified by the Middle 2
Frequency and Q settings.
Value: -15– +15 [dB]
Level (Output Level) #1, #2
Adjust the output level.
Value: 0–127