Copy Output - Xerox Document Centre ColorSeries 50 User Manual

1
The Copy Output feature enables you to select the
destination of the output and determine whether it
is to be collated or uncollated. For example, three
copies of a three-page collated job will result in
three sets of copies in 1, 2, 3 order. Three copies
of a three-page uncollated job will result in output
in the order 1, 1, 1, 2, 2, 2, 3, 3, 3.
2
If the Document Centre ColorSeries 50 does not
have a Sorter/Mailbox, only one output tray is
listed, as illustrated in Figure 30. No other option
is available.
3
If the Document Centre ColorSeries 50 has a
Sorter/Mailbox, output may be directed to the
Sorter/Mailbox Bins or Offset Catch Tray. Use the
following procedure to make your choice.
4
On the Basic Copying tab, touch the appropriate
Copy Output option, as illustrated in Figure 31:
•
5
•
•
6
7
BASIC COPYING

Copy Output

Touch Auto Output to direct collated output to
the Offset Catch Tray.
Touch Collated to direct up to 10 sets of
collated output to the Sorter/Mailbox Bins.
Touch Uncollated to direct uncollated output
to the Sorter/Mailbox Bins.
If the job has more than 10 original
documents, production will pause after the
tenth set has been delivered until you clear
the bins of all output and press Start.
Figure 30: Copy Output
without optional Sorter/Mailbox
Figure 31: Copy Output options
with optional Sorter/Mailbox
4–8 DOCUMENT CENTRE CS 50 USER GUIDE