Making Copies Using Features - Xerox Document Centre ColorSeries 50 User Manual

1
The feature tabs on the Touch Screen (Figure 7)
enable you to configure the copier/printer to suit
your copying needs.
The procedure below leads you quickly through a
number of features you may want to use in making
copies. It assumes that the feature tabs are in the
default configuration. You can find detailed
2
information about the features and options
referred to in this section in the chapters that
follow.
3
1
Press the Clear All (CA) button to clear any
previous programming.
Use any of steps 2 through 11 that apply to your
job and desired output.
2
Select the required quantity.
4
•
•
5
6
7
MAKING COPIES

Making copies using features

Use the Keypad to enter the quantity.
Press the Clear (C) button on the Numeric
Keypad to clear an incorrect quantity.
Figure 7: Touch Screen with Basic Copying
tab in Default Configuration
Figure 8: Keypad and Clear Key
3–8 DOCUMENT CENTRE CS 50 USER GUIDE