Xerox Document Centre ColorSeries 50 User Manual page 68

3
Select an option in the Output Colour feature if a
setting other than the default, Auto Colour, is
desired. Auto Colour enables the copier/printer to
select either Full Colour or Black and White to use
for the output.
Perform one of the following:
•
Touch the desired Output Colour option on the
Basic Copying tab.
•
Touch More... to see additional options, as
illustrated in Figure 9.
Touch the desired option and touch the Save
button to return to the Basic Copying screen.
4
If there is a Sorter/Mailbox, touch the appropriate
Copy Output option:
•
Touch Auto Output to direct collated output to
the Offset Catch Tray.
•
Touch Collated to direct up to 10 sets of
collated output to the Sorter/Mailbox Bins.
•
Touch Uncollated to direct uncollated output
to the lower Offset Catch Tray.
If the job has more than 10 original
documents, production will pause after the
tenth set has been delivered until you clear
the bins of all output and press Start.
KEY POINT:
•
Transparencies may not be used for two-sided
copying.
•
Transparencies cannot be delivered to the
Sorter/Mailbox bins. They must be directed to
the Catch Tray.
DOCUMENT CENTRE CS 50 USER GUIDE
Figure 9: Output Colour screen
Figure 10: Copy Output feature
3–9
1
2
3
4
5
6
7
MAKING COPIES