Control Panel Buttons - Xerox Document Centre ColorSeries 50 User Manual

Control Panel Buttons

The function of the Control Panel hard buttons is
described below. The numbers before the
descriptions correspond to the numbered call-outs
in Figure 3.
1 Numeric Keypad - Buttons 0 to 9 are used to
select a copy quantity up to the value set in the
Tools mode. These buttons are also used to enter
an access number.
2 Administration - This button is used by the
System Administrator.
3 Access - The copier/printer can be activated in
either the normal copying mode (without an
access number) or in the Access Number mode.
If the copier/printer is in the Access Number
mode, use the Access button to bring up the
Access screen and enter your access number
before trying to make any copies. Press the
Access button after you complete your job to exit
the user screens and ensure that no one else can
make copies using your access number.
DOCUMENT CENTRE CS 50 USER GUIDE
2
1
Figure 3: Control Panel buttons
2–3 GETTING TO KNOW YOUR COPIER / PRINTER
3
4
6
5
7
8
1
2
3
4
5
6
7