Multiple-Up
The Multiple-Up feature (Figure 77) enables
you to copy 2, 4, or 8 images from multiple
originals onto a single page, as illustrated in
Figure 78. Each image is centred in its space.
The default is set to 1 Page Up to produce a
single image on a single page.
NOTE: Keep the following notes in mind
when using Multiple-Up:
•
All originals must be the same size. Paper
size or magnification is determined by the
first original that is scanned.
•
Do not Interrupt the Multiple-Up job.
•
The following features may not be used in
conjunction with Multiple-Up:
–
–
–
•
When you copy original documents from
the Document Glass, you can only select
a 25-100% reduction.
•
Depending on the size of the original,
some image loss might occur along the
edge of the image.
•
Enlarged images cannot exceed 17
inches (432 mm) in the X direction.
•
Do not use 12 x 18 inch or SRA3 paper.
The order and final rotation of images depend
on the selections you make for the Image
Order and Original Orientation options, which
are described below.
DOCUMENT CENTRE CS 50 USER GUIDE
Margin Shift
Repeat Image
Bound Originals
Figure 77: Multiple-Up feature
Four
originals:
Four-up
output:
Figure 78: Example of Multiple-Up
7–3
F
E
F
E
OUTPUT FORMATS
1
2
3
4
5
6
7