Command Messages; Addboard; A.2 Command Messages; A.2.1 Addboard - Fujitsu SPARC Enterprise M4000 Features Manual

SCF error
Cannot add SPARC64-VI to domain booted with all SPARC64-VII CPUs
[Explanation] System board with SPARC64-VI cannot be added into a domain
booted with all SPARC64-VII CPUs when the domain's CPU mode is set as 'auto'
via XSCF.
[Remedy] The system board that failed to be added is 'assigned' to the target
domain. Please delete the system board to restore the status as 'available'.
SCF OFFLINE
[Explanation] XSCF failure or failover occurred during kernel migration.
[Remedy] Log in to XSCF again to check the status, and repeat the action.
A.2

Command Messages

A.2.1

addboard

XSB#XX-X will be assigned to DomainID X. Continue? [y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
XSB#XX-X will be configured into DomainID X. Continue? [y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
DR operation canceled by operator.
[Explanation] DR operation canceled by operator.
Domain (DomainID X) is not currently running.
[Explanation] Destination domain #0 was not active when "-c configure" was
specified.
[Remedy] Execute it by specifying "-c assign".
A-24 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • January 2012
[Explanation] Internal error happened during kernel migration.
[Remedy] Please contact customer service.