Fujitsu SPARC Enterprise M4000 Features Manual page 139

Another DR operation is in progress. Try again later.
[Explanation] The specified system board (XSB#XX-X) has already been executed
by another session.
[Remedy] DR operation is in progress by another session. Try again after waiting
for a while, with the confirmation of the XSB status.
XSB#XX-X is the last LSB for DomainID X, and this domain is
still running. Operation failed.
[Explanation] XSB#XX-X is the last LSB for domain#X.
[Remedy] Power off the domain by specifying "-c reserve".
XSB#XX-X detected timeout by DR self test.
[Explanation] The timeout occurred during DR processing because the hardware
diagnosis did not complete. There is something wrong with the hardware.
[Remedy] Find out the cause of the DR failure referring monitoring message and
errorlog. Replace the failure component.
XSB#XX encountered a hardware error. See error log for details.
[Explanation] An error occurred during hardware diagnosis. There is something
wrong with the hardware.
[Remedy] Find out the cause of the DR failure referring monitoring message and
errorlog. Replace the failure component.
IP address of DSCP path is not specified.
[Explanation] The DR processing cannot communicate the domain because DSCP
IP Address is not set up.
[Remedy] Register the DSCP IP Address.
An internal error has occurred. This may have been caused by a
DR library error.
[Explanation] The DR processing cannot be failed on the domain OS. The error
occurred at the DR library.
[Remedy] Find out the cause of the DR failure referring monitoring message and
errorlog. Confirm the patch applying status and the XCP version.
DR failed. Domain (DomainID X) cannot communicate via DSCP path.
[Explanation] DR processing cannot communicate with the domain. The reasons
are that domain is powered off, the DSCP setting is wrong or the error occurs at
the DSCP path.
Appendix A Message Meaning and Handling A-31