Fujitsu SPARC Enterprise M4000 Features Manual page 92

3. Check the status of the system board to be deleted.
Execute the showboards(8) command to display system board information, and
then check the status of the system board to be deleted.
XSCF> showboards -a
XSB
-------------------------------------------------------------------
00-0
01-0
4. Delete the system board.
Execute the deleteboard(8) command to delete the system board and pool it in
the system board pool.
XSCF> deleteboard -c unassign 01-0
5. Check the status of the domain and deleted system board.
When the deleteboard(8) command ends normally, execute the showdcl(8)
command to check the operation status of the domain, and then execute the
showboards(8) command to check the status of the deleted system board.
If the deleteboard(8) command completes abnormally or leaves the board in an
unwanted status, refer output messages to identify the problem, then correct it.
XSCF> showdcl -d 0
DID
00
XSCF> showboards -a
XSB
----------------------------------------------------------------
00-0
01-0
4-10 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • January 2012
DID(LSB) Assignment
00(00) Assigned
00(01) Assigned
LSB XSB Status
Running
00 00-0
01 01-0
DID(LSB) Assignment
00(00) Assigned
SP Available
Pwr Conn Conf
y y y
y y y
Pwr Conn Conf
y y y
y n n
Test Fault
Passed Normal
Passed Normal
Test Fault
Passed Normal
Passed Normal