Example: Deleting A System Board - Fujitsu SPARC Enterprise M4000 Features Manual

4.3

Example: Deleting a System Board

This section provides an example of operation to delete a system board from a
domain. In the example, a procedure conforming to
System Board" on page
deleted using the XSCF shell.
FIGURE 4-6
Domain#0
XSB#00-0
1. Login to XSCF.
2. Check the status of the domain.
Execute the showdcl(8) command to display domain information, and then check
the operation status of the domain. Based on the operation status of the domain,
determine whether to perform the DR operation or change the domain
configuration.
XSCF> showdcl -d 0
DID
00
4-4, is used, and the system board shown in the figure is
Example: Deleting a System Board
XSB#01-0
LSB XSB Status
Running
00 00-0
01 01-0
Domain#0
XSB#00-0
Delete
Chapter 4
Section 4.1.2, "Flow: Deleting a
XSB#01-0
Practical Examples of DR 4-9