Fujitsu SPARC Enterprise M4000 Features Manual page 101

9. Check the status of all related domains.
Execute the showdcl(8) command to display domain information, and then check
the operation status of all related domains. Based on the operation status of the
domain, determine whether to perform the DR operation or reboot the domains.
XSCF> showdcl -a
DID LSB XSB
00
00 00-0
01 01-0
02 01-1
-------
01
00 01-2
01 01-3
10. Add the new system board to the domain.
Execute the addboard(8) command in the domain to add the new system board.
XSCF> addboard -c configure -d 0 01-0 01-1
11. Check the status of the related domains and system boards.
Execute the showdcl(8) command to check the operation status of related
domains, and then execute the showboards(8) command to check the status of
related system boards.
In this example, domain #1 is booted by power-on in this stage.
XSCF> poweron -d 1
XSCF> showdcl -a
DID LSB XSB
00
00 00-0
01 01-0
02 01-1
-------
01
00 01-2
01 01-3
Status
Running
Powered Off
Status
Running
Running
Chapter 4 Practical Examples of DR 4-19