Fujitsu SPARC Enterprise M4000 Features Manual page 116

dr_reserve_mem_spans memory reserve failed. Unexpected
kphysm_del_span return value #; basepfn=# npages=#
[Explanation] The selected target board can no longer fit all the kernel memory of
the source board since it was last selected.
[Remedy] Please repeat the action. If the problem remains, please contact customer
service.
dr_release_mem_done: <device path>: error <error code> noted
[Explanation] Error noted for a device during releasing memory.
[Remedy] Please contact customer service.
drmach_log_sysevent failed (rv #) for SBX
[Explanation] There may be minor error in the system.
[Remedy] Please contact customer service.
unexpected kcage_range_add return value #
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
unexpected kcage_range_delete return value #
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_select_mem_target: no memlist for mem-unit X, board Y
[Explanation] Detected inconsistency of the memory unit information in the DR
driver's internal data.
[Remedy] Please contact customer service.
FAILED to suspend <device name>@<device info>
[Explanation] Device suspension failed
[Remedy] Repeat the action. If the message persists, please contact customer
service.
FAILED to resume <device name>@<device info>
[Explanation] The device cannot be resumed.
[Remedy] Please contact customer service.
A-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • January 2012