Setting Of Oracle Solaris Service Management Facility (Smf); Status Management; Domain Status; Section 2.4, "Status Management - Fujitsu SPARC Enterprise M4000 Features Manual

Dynamic reconfiguration (dr) user's guide
Hide thumbs Also See for SPARC Enterprise M4000:
Table of Contents

Advertisement

2.3.3
Setting of Oracle Solaris Service Management
Facility (SMF)
Certain DR operations succeed only when the following Oracle Solaris Service
Management Facility (SMF) services are active on the domain:
Domain SP Communication Protocol (dscp)
Domain Configuration Server (dcs)
Sun Cryptographic Key Management Daemon (sckmd)
For details, see the Notes about SMF services in
Information" on page
Section 3.1.7, "Deleting a System Board" on page
System Board" on page
2.4

Status Management

The success of DR operations depends on the status of domains and system boards.
This section describes the status information on the domains and system boards
managed by XSCF, and the points to be noted for a better understanding of DR
operation conditions.
2.4.1

Domain Status

XSCF manages the status of each domain.
You can display and reference the status of each domain through a user interface
provided by XSCF. For details of the user interface, see
Interface.
XSCF manages the following aspects of domain status:
TABLE 2-2
Status
Powered Off
Initialization Phase
OpenBoot Executing
Completed
2-18
SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • January 2012
3-10,
Section 3.1.6, "Adding a System Board" on page
3-19.
Domain Status
Description
Domain power is off.
POST processing or OpenBoot PROM initialization is in progress.
Initialization of OpenBoot PROM is completed.
Section 3.1.4, "Displaying Device
3-17, and
Section 3.1.8, "Moving a
Chapter
3, DR User
3-15,

Advertisement

Table of Contents
loading

Table of Contents