Displaying System Board Configuration Information - Fujitsu SPARC Enterprise M4000 Features Manual

Example: Display of device information on XSB00-0
■
XSCF> showdevices 00-0
CPU:
----
DID
00
00
Memory:
-------
remaining
DID
mem MB
00
I/O Devices:
----------
DID
00
00
00
00
10.1.1.1
3.1.5 Displaying System Board Configuration
Information
Use the showfru(8) command to display system board configuration information.
The showfru(8) command displays information about the PSB division type and
memory mirroring mode settings in list format.
To change the PSB configuration, use the setupfru(8) command.
The following examples show the format and options of the showfru(8) command.
showfru -a device
showfru device location
showfru -h
XSB id state
00-0 0 on-line
00-0 1 on-line
board perm
XSB mem MB mem MB
00-0 8192 2048
XSB device resource
00-0 sd0 /dev/dsk/c0t0d0s0
00-0 sd0 /dev/dsk/c0t0d0s1
00-0 sd0 /dev/dsk/c0t0d0s1
00-0 bge0 SUNW_network/bge0
speed ecache
2048 4
2048 4
base
address
0x000003c000000000
usage
mounted filesystem "/"
swap area
dump device (swap)
bge0 hosts IP addresses:
domain target deleted
mem MB XSB mem MB
65536
Chapter 3 DR User Interface 3-13