Preface - Fujitsu SPARC Enterprise M4000 Features Manual

Preface

This guide describes the Dynamic Reconfiguration (DR) feature of SPARC Enterprise
M4000/M5000/M8000/M9000 servers from Oracle and Fujitsu. DR enables users to
add, remove or exchange system boards in the M4000/M5000 (midrange) and
M8000/M9000 (high-end) servers while the domains that contain these boards
remain up and running. The M3000 server does not support DR.
Some references to server names and document names are abbreviated for
readability. For example, if you see a reference to the M9000 server, note that the full
product name is the SPARC Enterprise M9000 server. And if you see a reference to
the XSCF Reference Manual, note that the full document name is the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.
Before reading this document, you should read the overview guide for your server,
the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration
Guide, and the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF
User's Guide.
At publication of this document, servers described herein were shipping with XCP
1110 firmware supported or installed. That might no longer be the latest available
version, or the version now installed. Always see the Product Notes that apply to the
firmware on your server, and those that apply to the latest firmware release.
This chapter includes the following sections:
"Audience" on page x
■
"Related Documentation" on page x
■
"Text Conventions" on page xii
■
"Syntax of the Command-Line Interface (CLI)" on page xii
■
"Documentation Feedback" on page xiii
■
ix