Fujitsu SPARC Enterprise M4000 Features Manual page 127

IKP: destroy pci (<board>-<channel>-<leaf>) failed
[Explanation] The node was not destroyed.
[Remedy] Please contact customer service.
IKP: destroy pseudo-mc (<board>) failed
[Explanation] The node was not destroyed.
[Remedy] Please contact customer service.
IKP: destroy chip (<board>-<chip>) failed
[Explanation] The node was not destroyed.
[Remedy] Please contact customer service.
dr_del_mlist_query: mlist=NULL
[Explanation] The memory list to be deleted is NULL. This warning is also shown
at memoryless board.
[Remedy] Please ignore this message on memoryless boards. If DR failed after this
message, please contact customer service.
dr_memlist_canfit: memlist_dup failed
[Explanation] System might have run out of memory. Or there is a memoryless
board.
[Remedy] Please ignore this message on memoryless boards. If DR failed after this
message, please check if the system has enough memory resource and repeat the
action. If the error remains, please contact customer service.
Cannot get floating-boards proplen
[Explanation] Failed to get property information of floating-boards.
[Remedy] Please contact customer service.
Cannot get floating-boards prop
[Explanation] Failed to get property information of floating-boards.
[Remedy] Please contact customer service.
Device node 0x<dip> has invalid property value, board#=<board>
[Explanation] The device node has invalid property value.
[Remedy] Please contact customer service.
DR - IKP initialization failed
Appendix A Message Meaning and Handling A-19