Cisco Catalyst 2950 Command Reference Manual page 372

wrr-queue cos-map
After entering the wrr-queue cos-map 2 0 1 2 3 command, if all other priority queues use their default
setting, this is the new mapping:
CoS Value
Not applied
0, 1, 2, 3
4, 5
6, 7
In the previous example, CoS priority queue 1 is no longer used because no CoS value is assigned to the
queue.
You can set the CoS values to the default values by entering the no wrr-queue cos-map global
configuration command.
You can verify your settings by entering the show wrr-queue cos-map privileged EXEC command.
Related Commands Command
wrr-queue bandwidth
show wrr-queue bandwidth
show wrr-queue cos-map
Catalyst 2950 Desktop Switch Command Reference
2-348
CoS Priority Queue
1
2
3
4
Description
Assigns weighted round-robin (WRR) weights to the four CoS
priority queues.
Displays the WRR bandwidth allocation for the four CoS
priority queues.
Displays the mapping of the CoS to the priority queues.
Chapter 2 Cisco IOS Commands
78-11381-05