Cisco Catalyst 2950 Command Reference Manual page 126

monitor session
This example shows how to configure RSPAN session 1 to monitor multiple source interfaces and to
configure the destination RSPAN VLAN and the reflector-port.
Switch(config)# monitor session 1 source interface fastEthernet0/10 tx
Switch(config)# monitor session 1 source interface fastEthernet0/2 rx
Switch(config)# monitor session 1 source interface port-channel 102 rx
Switch(config)# monitor session 1 destination remote vlan 901 reflector-port
fastEthernet 0/1
Switch(config)# end
You can verify your settings by entering the show monitor privileged EXEC command.
Related Commands Command
remote-span
show monitor
Catalyst 2950 Desktop Switch Command Reference
2-102
Description
Configures an RSPAN VLAN in vlan configuration mode.
Displays SPAN and RSPAN session information.
Chapter 2 Cisco IOS Commands
78-11381-05