Debug Pagp - Cisco Catalyst 2950 Command Reference Manual

debug pagp

debug pagp
Use the debug pagp privileged EXEC command to debug Port Aggregation Protocol (PAgP) activity.
Use the no form of this command to disable debugging output.
Syntax Description
all
event
fsm
misc
packet
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
This command can be entered only from the switch console.
The undebug pagp command is the same as no debug pagp command.
Related Commands Command
show debugging
show pagp
Catalyst 2950 Desktop Switch Command Reference
A-4
debug pagp [all | event | fsm | misc | packet]
no debug pagp [all | event | fsm | misc | packet]
(Optional) Enable all PAgP debugging.
(Optional) Enable debugging of PAgP events.
(Optional) Enable debugging of the PAgP finite state machine.
(Optional) Enable miscellaneous PAgP debugging.
(Optional) Enable PAgP packet debugging.
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, refer to Cisco IOS Configuration Fundamentals
Command Reference For IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Displays PAgP channel-group information.
Appendix A Debug Commands
78-11381-05