Cisco Catalyst 2950 Command Reference Manual page 179

Chapter 2 Cisco IOS Commands
This is an example of output from the show etherchannel 1 port command:
Switch> show etherchannel 1 port
Port: Fa0/3
------------
Port state
Channel group = 1
Port-channel
Port index
Flags:
Timers: H - Hello timer is running.
Local information:
Port
Fa0/3
Age of the port in the current state: 10d:23h:13m:21s
Related Commands Command
channel-group
interface port-channel
78-11381-05
Ports in the group:
-------------------
= Down Not-in-Bndl
Mode = Automatic-Sl
= null GC
= 0 Load = 0x00
S - Device is sending Slow hello.
A - Device is in Auto mode.
d - PAgP is down.
S - Switching timer is running.
Flags State Timers
dA U1/S1
Description
Assigns an Ethernet interface to an EtherChannel group.
Accesses or creates the port channel.
Gcchange = 0
= 0x00000000 Pseudo port-channel = Po1
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
1s 0 200
Catalyst 2950 Desktop Switch Command Reference
show etherchannel
Learning Group
Method Ifindex
Any 0
2-155