Cisco Catalyst 2950 Command Reference Manual page 79

Chapter 2 Cisco IOS Commands
Examples
This example shows how to set a Fast Ethernet port to half duplex:
Switch(config)# interface fastethernet0/11
Switch(config-if)# duplex half
This example shows how to set a Gigabit Ethernet port to full duplex:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# duplex full
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
show running-config
speed
78-11381-05
Description
Displays the configuration information running on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference for Release 12.1 > Cisco IOS File Management Commands >
Configuration File Commands.
Specifies the port speed.
Catalyst 2950 Desktop Switch Command Reference
duplex
2-55