Show Env - Cisco Catalyst 2950 Command Reference Manual

show env

show env
Use the show env user EXEC command to display fan information for the switch.
Syntax Description
all
fan
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.0(5.2)WC(1)
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show env all command:
Switch> show env all
FAN 1 is OK
This is an example of output from the show env fan command:
Switch# show env fan
FAN 1 is FAULTY
Catalyst 2950 Desktop Switch Command Reference
2-150
show env {all | fan} [ | {begin | exclude | include} expression]
Display both fan and temperature environmental status.
Display the switch fan status (only available in privileged EXEC mode).
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Chapter 2 Cisco IOS Commands
78-11381-05