Switchport Nonegotiate - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands
Examples
This example shows how to cause an interface to refrain from negotiating trunking mode and to act as a
trunk or access port (depending on the mode set):
Switch(config-if)# switchport nonegotiate
You can verify your setting by entering the show interfaces interface-id switchport privileged EXEC
command.
Related Commands Command
show interfaces
switchport mode
78-11381-05
Description
switchport Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection settings.
Configures the VLAN membership mode of a port.
Catalyst 2950 Desktop Switch Command Reference

switchport nonegotiate

2-295