Getting started
Indicator lights & tones
Continued from previous page
Alert tones
Confirmation tone
One double-beep
every 30 seconds
A triple-beep
NEW CALL
•
On when there are unreviewed calls.
•
Flashes when there are new voice mail
messages. The screen displays COVM, with 1, 2,
3, and/or 4 under COVM, depending on which
lines have messages waiting.
•
Flashes when there are new system extension
messages. The screen will display DTAD: XX/YY
(with XX greater than zero).
INTERCOM
•
On when the telephone is on an intercom call
or a paged call.
•
On when the system is busy and the intercom is
unavailable.
•
Flashes when an incoming intercom call.
HEADSET
•
On when the headset is in use.
•
Flashes when there is an auto-redial call with
the headset.
MUTE
•
On when the microphone is muted.
SPEAKER
•
On when the speakerphone is in use.
•
Flashes when there is an auto-redial call on the
speakerphone.
Programming command completed successfully.
The hold reminder feature is on and there is a
line on hold.
During volume adjustment, the volume level has
reached the maximum or minimum.
7