PARTS CHECKLIST Remember to save your sales receipt in case you ever need warranty service, and make sure this telephone package includes the items shown below: TELEPHONE BASE Table Model Coiled handset cord This telephone has a selectable push-button dial and will work with either tone or rotary telephone service.
Page 3
TABLE/DESK INSTALLATION 1. Set Dial Mode switch This product comes set in the tone (TT) mode. Make sure you choose the correct dialing method (TT/DP); touch tone dialing will not work if you have dial pulse service. 2. Connect line cord to telephone and wall jack Plug one end of the line cord into the jack on the...
WALL INSTALLATION 1. Set Dial Mode switch This product comes set in the tone (TT) mode. Make sure you choose the correct dialing method (TT/DP); touch tone dialing will not work if you have dial pulse service. 2. Connect the line cord and install telephone on wall jack Plug the three-inch line cord...
OPERATION Receiver Volume Control The Receiver Volume Control can be adjusted for a comfortable listening level. The switch has variable volume positions. Redial The telephone always stores in memory the last phone number dialed. To dial the same number again, lift the handset and press REDIAL Erasing Redial...
IN CASE OF DIFFICULTY If you have difficulty operating this phone, try the suggestions below. No Dial Tone Make sure all plugs are connected properly. Inspect the line cord connections at the modular jack and at the telephone. Also inspect the coiled handset cord connections at both ends.