AT&T 1070 User Manual page 43

One-touch setup and operation
One-touch storage
Continued from previous page
6. Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
[LOWER],
Press
key to store the telephone number in the lower
location.
NOTES:
• If the desired one-touch key location is empty,
the screen displays SAVED! If there is already
telephone number in it, the screen displays
REPLACE SPD#XX? (XX is the desired one-
touch location number.) You can replace the
current entry by pressing [ENTER], or keep the
current entry by pressing [ ] or [ ] until you
see NO REPLACE? Press [ENTER]. Then choose
another one-touch key location.
• Only the last number dialed from this extension
can be copied to a one-touch location. The
other numbers in the redial stack cannot be
copied.
• Press and hold [ENTER] to exit one-touch
setup.
37
then the desired one-touch