Call Waiting And Message Waiting; Cid With Call Waiting; Message Waiting And New Call Light - AT&T 1070 User Manual

(CALL WAITING) L1
Chris Thompson
5550100
10:01AM 11/23
EXT 11
CID: 100/98
DTAD:16/20
Caller ID operation

Call waiting and message waiting

CID with call waiting

If you subscribe to caller ID with call waiting
service and you receive a call waiting call, not
only will you hear the normal call waiting tone,
but (CALL WAITING) and the caller information
for the incoming call appear on the screen.
1. Press [FLASH] to access the call waiting call.
2. To return to the original call, press [FLASH]
again.

Message waiting and NEW CALL light

This NEW CALL light stays on when you
have received call information but have not
yet reviewed it. If you subscribe to a voice
mail service, this light flashes when you have
unretrieved messages waiting. The screen also
COVM
displays information about the number of new
1 34
calls and voice mail messages waiting.
CID:100/198 Indicates 100 new caller ID entries
L2
COVM
1 3 4
NOTE: You have to set COVM ON to receive
notification of "message waiting" (page 41 of the
installation guide).
and 198 total caller ID entries.
The call came in on line 2.
There is voice mail (message
waiting) information on lines 1, 3
and 4.
57