Intercom Operation; Intercom Overview - AT&T 1070 User Manual

Intercom operation

Intercom overview

This 1070 telephone is fully compatible with any AT&T Four-Line Small
Business System Speakerphone 1040 or 1080 phones you might have
installed. You can use a total of 16 1080/1070/1040 phones together as
extensions in your phone system.
Each individual phone in your telephone system MUST be assigned a unique
extension number for the intercom feature to work. See EXTENSION
NUMBER on page 32 of the installation guide for instructions.
This intercom features both a single-phone page and a system-wide page
(PAGE ALL).
A single-phone page alerts only one phone. A system-wide page (PAGE ALL)
alerts all system phones. Any phone with the Do Not Disturb (DND) feature
turned on does not receive the page.
An intercom call rings at the called extension with a repeating double-ring
pattern.
A single-phone page automatically turns on the speakerphone on the
receiving phone. You can deactivate the speakerphone by lifting the handset.
NOTES:
If a line is in use, pressing [INTERCOM] places the line on hold and turns
•
on the intercom (page 24).
• If you subscribe to DSL service, please read Important information for
DSL users beginning on page 6 of the installation guide for information
about minimizing problems with this phone caused by DSL signals.
Basic intercom operations
Operation:
INTERCOM
PAGE
PAGE ALL
CONFERENCE
Function:
Lets any two extensions connected to line 1 ring
each other (page 26).
Lets you announce over the speaker of the
called phone you're calling (page 29).
Lets you announce to all phones in the system
at the same time (system-wide page) (page 31).
Lets you connect an intercom call with an
outside line (page 33).
25