Display Screen Messages; Lcd Contrast - AT&T 1070 User Manual

Getting started

Display screen messages

SPECIAL OPTIONS
LEVEL-4

LCD CONTRAST

AC FAIL
COVM
COVM
1 2 3 4
DND
DTAD: XX/YY
LCD CONTRAST
Your set's display provides important information.
You can adjust the screen contrast to one of eight
levels to optimize readability in different lighting
conditions.
1. Press [ENTER].
Press [ ] or [ ] until you see SPECIAL
2.
OPTIONS. Press [ENTER].
3. Press [ ] or [ ] until you see LCD CONTRAST.
4. Press [ ] or [ ] to select the appropriate screen
contrast level (1-8).
To move to the next feature, press [ ].
5.
-OR-
To exit setup, press and hold [ENTER].
There is no AC power to the set. If a good
battery is installed, basic phone operation (such
as making and answering calls on the handset)
is supported. Speakerphone, headset and call
privacy are not supported. The handset volume
will be at the minimum level and only the
two lowest levels of the ringer volume will be
available.
The telephone is ready to receive a voice mail
signal from your local telephone company.
There are new voice mail messages.
The Do Not Disturb mode is on.
Flashes when the mailboxes of the DTAD mailbox
1080 telephone are full or when the auto
attendant of the DTAD mailbox 1080 telephone
is off. (XX is the total number of new system
extension messages recorded for this 1070
telephone. YY is the total number of all system
extension messages recorded for this 1070
telephone.)
4
Continued on next page