Mitsubishi Electric Melservo MR-J3-A Instruction Manual page 188

5. PARAMETERS
No. Symbol
PD10 *DI8 Input signal device selection 8 (CN1-43)
Any input signal can be assigned to the CN1-43 pin.
The devices that can be assigned and the setting method are the
same as in parameter No. PD03.
0 0
PD11 *DI9 Input signal device selection 9 (CN1-44)
Any input signal can be assigned to the CN1-44 pin.
The devices that can be assigned and the setting method are the
same as in parameter No. PD03.
0 0
PD12 *DI10 Input signal device selection 10 (CN1-45)
Any input signal can be assigned to the CN1-45 pin.
The devices that can be assigned and the setting method are the
same as in parameter No. PD03.
0 0
Name and Function
Position control mode
Speed control mode
Torque control mode
Position control mode
Speed control mode
Torque control mode
Position control mode
Speed control mode
Torque control mode
5 - 45
Initial
Unit
Value
0000 Refer to
0A0Ah
Function
Select the
input device
of the CN1-
43 pin.
0000 Refer to
0B0Bh
Function
Select the
input device
of the CN1-
44 pin.
0023 Refer to
2323h
Function
Select the
input device
of the CN1-
45 pin.
Setting Control Mode
Range Position Speed Torque
the
Name
and
field.
the
Name
and
field.
the
Name
and
field.