Lp Conversion Instructions - Travis Industries Northfield GS2 Owner's Manual

Optional Equipment
44

LP Conversion Instructions

WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not proper and complete until
the operation of the converted appliance is checked as specified in the manufacturer's instructions
supplied with the kit.
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Remove the glass (see page 29). Remove the logs and embers (if installed - page 31).
2 Remove the burner (see below). Grasp the burner with both hands and lift it straight up and out of
the firebox.
© Travis Industries
(for qualified installers only)
4121120 100-01315